Chambers Truss

5.1 Communicate the design criteria from the Construction Design Documents to the Truss Designer.

5.2 Where required by the Construction Design Documents, prepare the Truss Placement Plan, providing as a minimum the location assumed for each Truss based on the Truss Manufacturer's interpretation of the Construction Design Documents.

5.3 Submit to the Contractor the Truss Placement Plan, as may be required, and each Truss Design Drawing for review and approval.

5.4 Manufacture the Trusses in accordance with the final approved Truss Design Drawings using the quality criteria for Metal Plate Connected Wood Trusses established by the ANSI/TPl 1-1995 "National Design Standard for Metal Plate Connected Wood Truss Construction."'

This material may not be reproduced without the written permission of the Wood Truss Council of America (WTCA). Contact WTCA at www.woodtruss.com.