Chambers Truss

4.1 Provide to the Truss Manufacturer the Construction Design Documents and all revisions and supplements thereto.

4.2 Review and approve the Truss Placement Plan and each Truss Design Drawing for conformance with the requirements and intent of the Construction Design Documents, and the effect of the Truss Placement Plan and each Truss Design Drawing on other trades involved in the construction of the structure and the effect of the other trades on the Trusses.

4.3 Coordinate the review, approval and return of each Truss Design Drawing and the Truss Placement Plan by the Owner and Building Designer.

4.4 Provide the approved Truss Design Drawings, approved Truss Placement Plans, and any supplemental information provided by the Truss Manufacturer to the individual or organization responsible for the installation of the Trusses.

4.5 Comply with the field storage, handling, installation, permanent bracing, anchorage, connections and field assembly requirements of the Construction Design Documents.

4.6 Determine and install the temporary bracing for the structure, including the Trusses.

This material may not be reproduced without the written permission of the Wood Truss Council of America (WTCA). Contact WTCA at www.woodtruss.com.